• Device Model: Samsung Galaxy Grand Prime (SM-G530FZ)
• Regional Variant: Europe / International (LTE / NFC)
• Processor / Platform: Qualcomm Snapdragon 410 (MSM8916)
• Stock OS: Android 4.4.4 KitKat / Android 5.0.2 Lollipop
• Target Recovery: TeamWin Recovery Project (TWRP)
• Status: 100% Tested & Verified Working

Prerequisites & Preparation​

1. Samsung USB Drivers: Download and install official Samsung Mobile USB drivers on your PC.
2. Flashing Utility: Download Odin3 (v3.10.7 or v3.12.3 recommended).
3. Recovery Tar: Obtain the verified twrp-grandprimelte-g530fz.tar file.
4. Data Cable: Reliable Micro-USB cable connected directly to a PC motherboard USB port.
5. Battery Level: Keep device battery charged above 50%.

Step-by-Step Installation Instructions (Nasıl Yüklenir?)​

Step 1: Enable Developer Options & OEM Unlock​

1. Go to Settings > About Device.
2. Tap Build Number 7 times continuously until "Developer mode has been enabled" appears.
3. Return to Settings > Developer Options.
4. Enable USB Debugging.
5. Enable OEM Unlocking (if running Android 5.0+ where this toggle is present, to bypass FRP binary lock).

Step 2: Boot into Samsung Download Mode​

1. Power off the phone completely.
2. Press and hold Volume Down + Home + Power buttons together until the warning screen appears.
3. Press Volume Up once to confirm and enter Download Mode (Odin Mode).

Step 3: Flash TWRP via Odin​

1. Launch Odin3 as Administrator on your PC.
2. Connect your phone via the Micro-USB cable. The ID:COM box will light up in blue/yellow.
3. Click the AP (or PDA) button and select the twrp.tar file.
4. Go to the Options tab in Odin:
   
   • Keep F. Reset Time checked.
   • Uncheck Auto Reboot (Essential: Prevents stock Android from automatically overwriting TWRP on the first restart).
5. Click Start to flash and wait for Odin to display the green PASS! message.

Step 4: First Boot into TWRP Recovery​

1. Disconnect the USB cable.
2. Pull out the battery for 3 seconds, then reinsert it.
3. Press and hold Volume Up + Home + Power simultaneously.
4. Release the buttons the moment the Samsung boot logo appears with small recovery text in the top-left corner.
5. The device will boot straight into the TWRP interface.
6. Swipe to allow modifications, then flash SuperSU / Magisk.zip or proceed with custom ROM installation.