• Device Model: Samsung Galaxy S23 FE 5G (SM-S711U1 / SM-S7110 / SM-S711W)
• Chipset / Platform: Qualcomm Snapdragon 8 Gen 1 (SM8450)
• Storage Interface: UFS 3.1
• Operating System: Android 13 / 14 / 15 (One UI)
• Target Recovery: TeamWin Recovery Project (TWRP)
• Status: Tested & Working on Unlocked Bootloader Units

Prerequisites & Important Warnings​

• Bootloader Unlock: The bootloader must be completely unlocked. (Note: US carrier models like SM-S711U with locked Knox cannot be unlocked via standard OEM unlock).
• Knox Warranty Void: Flashing custom binaries permanently trips Knox counter (0x1), disabling Samsung Knox-based security apps (Samsung Pass, Secure Folder, Samsung Wallet).
• Data Loss: Unlocking the bootloader and formatting data will erase all personal files. Create a full backup beforehand.
• Required Files & Tools:
  
  • Odin3 (v3.14.4 or latest).
  • Latest Samsung Mobile USB Drivers installed on PC.
  • Verified twrp-s23fe-qualcomm.tar file.
  • vbmeta_disabled.tar to bypass AVB (Android Verified Boot).
  • Magisk APK / Multidisabler ZIP file.

Step-by-Step Installation Instructions (Nasıl Yüklenir?)​

Step 1: Unlock the Bootloader​

1. Go to Settings > About Phone > Software Information and tap Build Number 7 times to enable Developer Options.
2. Go to Settings > Developer Options, enable USB Debugging and toggle OEM Unlocking.
3. Turn off the phone completely.
4. Press and hold Volume Up + Volume Down simultaneously and connect the phone to your PC via a USB cable.
5. On the blue warning screen, long-press Volume Up to enter Device Unlock Mode. Confirm the unlock (this wipes all user data and reboots).
6. Complete basic setup, reconnect to Wi-Fi, and verify in Developer Options that OEM Unlock is greyed out and reads "Bootloader already unlocked."

Step 2: Flash TWRP & Patched VBMeta via Odin​

1. Power off the phone again and enter Download Mode (Hold Volume Up + Volume Down while plugging in the USB cable to PC, then tap Volume Up once).
2. Open Odin3 as Administrator on your PC. The ID:COM box should turn light blue.
3. Place vbmeta_disabled.tar into the USERDATA or CP slot (depending on the patch package instructions).
4. Place the twrp-s23fe.tar file into the AP slot.
5. In the Options tab in Odin:
   
   • Keep F. Reset Time checked.
   • Uncheck Auto Reboot (Crucial: Prevents Samsung from overwriting TWRP with the stock recovery on the first boot).
6. Click Start and wait for the green PASS! status.

Step 3: First Boot into TWRP & Disable Encryption​

1. Unplug the USB cable.
2. Force power off the phone by holding Volume Down + Power.
3. The instant the screen turns black, immediately switch your fingers to hold Volume Up + Power.
4. Release the buttons only when the TWRP splash screen appears.
5. In TWRP:
   
   • Tap Wipe > Format Data, type yes, and confirm (removes dynamic file encryption).
   • Go back to the main menu, tap Reboot > Recovery to remount partitions.
   • Optional: Flash Magisk.zip or a multidisabler zip via Install to ensure permanent root access and prevent stock recovery overwrite.
6. Tap Reboot > System to boot into the OS.