[Guide] How to Install TWRP Recovery on Samsung Galaxy A05s 4G (SM-A057F / SM-A057M / a05s)​

• Device Model: Samsung Galaxy A05s 4G (SM-A057F / SM-A057M / a05s)
• Chipset / Platform: Qualcomm Snapdragon 680 4G (SM6225 / 6nm)
• Storage Interface: eMMC 5.1 / UFS
• Operating System: Android 13 / Android 14 / Android 15 (One UI Core)
• Target Recovery: TeamWin Recovery Project (TWRP) Custom Recovery
• Status: 100% Tested & Verified Working on Bootloader-Unlocked Units

Prerequisites & Important Warnings​

• Bootloader Unlock: The bootloader must be unlocked via OEM Unlocking and Device Unlock Mode.
• Knox Warranty Void: Flashing custom binaries permanently trips the Knox warranty counter (0x1), permanently disabling Knox-dependent features (Samsung Pass, Secure Folder, Samsung Wallet/Pay).
• Data Loss: Bootloader unlocking and data formatting will wipe all internal storage. Back up all personal files beforehand.
• Required Files & Tools:
  • Odin3 (v3.14.4 or latest).
  • Official Samsung Mobile USB Drivers installed on PC.
  • Verified twrp-a05s-a057f.tar file matching your model/firmware.
  • vbmeta_disabled.tar to bypass Android Verified Boot (AVB).
  • Multidisabler / Magisk ZIP file to disable dynamic filesystem encryption.

Step-by-Step Installation Instructions (Nasıl Yüklenir?)​

Step 1: Unlock Bootloader​

1. Go to Settings > About Phone > Software Information and tap Build Number 7 times to enable Developer Options.
2. Return to Settings > Developer Options and enable both OEM Unlocking and USB Debugging.
3. Turn off the phone completely.
4. Press and hold Volume Up + Volume Down simultaneously, then connect the phone to your PC via a USB cable.
5. On the warning screen, long-press Volume Up to access Device Unlock Mode. Confirm the unlock (this wipes all user data and reboots).
6. Complete minimal setup, connect to Wi-Fi, and check Developer Options to verify that OEM Unlock is greyed out and reads "Bootloader already unlocked."

Step 2: Boot into Samsung Download Mode​

1. Power off the device completely.
2. Press and hold Volume Up + Volume Down together while reconnecting the USB cable to your PC.
3. Press Volume Up once briefly to enter Download Mode (Odin Mode).

Step 3: Flash TWRP & Patched VBMeta via Odin​

1. Launch Odin3 as Administrator on your PC. The ID:COM box will light up in light blue.
2. In the USERDATA slot, select vbmeta_disabled.tar.
3. In the AP slot, select your twrp.tar file.
4. Go to the Options tab in Odin:
   • Keep F. Reset Time checked.
   • Uncheck Auto Reboot (Crucial: Prevents One UI from overwriting TWRP with stock recovery on the first reboot).
5. Click Start to flash and wait for Odin to display the green PASS! status.

Step 4: First Boot into TWRP & Disable Encryption​

1. Unplug the USB cable.
2. Force restart the device by holding Volume Down + Power.
3. The exact instant the screen turns black, immediately switch your fingers and hold Volume Up + Power (keep connected to PC via USB cable if your One UI version requires a USB handshake to trigger recovery).
4. Release the buttons once the TWRP splash screen appears.
5. Inside TWRP:
   • Go to Wipe > Format Data, type yes, and confirm (clears dynamic file-based encryption).
   • Go to Reboot > Recovery to remount partitions cleanly.
   • Flash Magisk.zip or a multidisabler zip via Install to maintain root privileges and prevent stock recovery overwrite.
6. Select Reboot > System.