Samsung Galaxy S26 (SM-S942B) UFS ISP Pinout | Direct Boot Repair
Device & Technical Details:
Device & Technical Details:
- Brand / Model: Samsung Galaxy S26 (<span>SM-S942B</span>)
- Processor Platform: Samsung Exynos 2600 / Qualcomm SM8850 (Region Dependent)
- Storage Type: UFS 4.0
- Connection Protocol: UFS ISP (In-System Programming)
- Status: Hardware Tested & Verified
Pinout Signals & Connection Points
UFS direct bağlantısı (ISP) yaparken lehimlenecek kritik hatlar:- TX0_P / TX0_N (Data Transmit Differential Pair)
- RX0_P / RX0_N (Data Receive Differential Pair)
- REF_CLK (Reference Clock Line)
- RESET (UFS Hardware Reset)
- VCC (2.5V - 3.3V Core Power)
- VCCQ / VCCQ2 (1.2V / 1.8V I/O Interface Power)
- GND (Ground / Şase)
Compatible Programmer Hardware
- EasyJTAG Plus (with UFS ISP socket / adapter)
- Medusa Pro II (UFS ISP mode)
- MiPi Tester Box (Direct High-Speed UFS ISP)
- UFI-UFS ToolBox
Practical Instructions:
- Wire Length: Always use enameled copper jumper wires no longer than 3–5 cm to avoid signal attenuation on high-frequency differential lines (TX/RX/CLK).
- Power Supply: If powering externally, connect the original USB Type-C cable or battery; otherwise, supply precise voltages (VCC: 2.5V–3.3V, VCCQ: 1.2V–1.8V) via the programmer box.
- Safety Backup: Once connected, immediately read and dump LUN0, LUN1, LUN2, and critical security partitions (EFS, SEC_EFS, NV/Modem).