Dump Honor 200 / Honor 400 Series (ELI-NX9) UFS Dump File | Dead Boot Repair / Unbrick

[Mpyunlock]

Device Specifications & Firmware Details:

• Device Model: Honor 200 5G / Honor 400 Series (ELI-NX9 / ELI-AN00)
• Chipset / Platform: Qualcomm Snapdragon 7 Gen 3 (SM7550-AB, 4nm)
• Storage Interface: UFS 3.1
• Operating System: MagicOS (Android 14 / Android 15)
• File Status: 100% Tested & Verified on Working Hardware

Overview & File Description​

This package contains the full raw storage dump and bootloader partition layout read from a fully functional Honor ELI-NX9 device. It is built to repair hard-bricked devices, fix corrupted partition tables, or program replacement UFS chips directly via hardware sockets or ISP.

Included Partitions & Contents:

• Full LUN layout: LUN0, LUN1, LUN2, LUN3, LUN4, LUN5
• Core Qualcomm bootloaders: xbl, xbl_config, abl, tz, hyp, devinfo, boot, etc.
• Complete GPT partition tables and XML flashing profiles (rawprogram0.xml, patch0.xml)

Compatible Programmer Hardware & Boxes:

• EasyJTAG Plus (UFS Socket / ISP)
• Medusa Pro II
• MiPi Tester Box
• UFI-UFS ToolBox

Key Applications & Use Cases:​

1. Dead Boot Repair: Recover devices permanently locked in Qualcomm Emergency Download Mode (EDL 9008), drawing low idle current (0.02A–0.07A), or showing no display/vibration.
2. Hard Brick Fix: Restore boot partitions corrupted by cross-flashing wrong firmware, interrupted OTA updates, or corrupted bootloaders.
3. Storage IC Replacement: Program directly to fresh UFS 3.1 storage chips to configure the partition map and factory boot structure from a blank state.

Important Warning:

Before writing the entire dump or repartitioning, always dump and backup the network/security partitions (modemst1, modemst2, fsg, fsc, persist, sec_efs) to preserve the device's original IMEI, Baseband calibrations, and factory serial numbers.

PAİD SUPPORT:

This link is hidden. To view it, please... log in veya sign up.